Publications and Inventions

Book Chapters and Special Issues:

  1. M. Kitayama, J. D. Powers, L. Kulinsky, and A. M. Glaeser, “Microdesigned Interfaces: New Opportunities for Studies of Surfaces and Grain Boundaries,” in “Ceramic Microstructures: Control at the Atomic Level” edited by Antoni P. Tomsia and Andreas M. Glaeser; Springer US (1996)
  2. L. Kulinsky, M. Madou, “BioMEMS for Drug Delivery Applications,” in “MEMS for biomedical applications,” edited by S. Bhansali and V. Vasudev; Woodhead Publishing (2011)
  3. Soroori, L. Kulinsky, M. Madou, “Centrifugal Microfluidics – Characteristics and Possibilities,” Book “Microfluidics and Microscale Transport Processes” edited by Suman Chakraborty, PhD; Taylor and Francis, CRC Press (2012)
  4. L. Kulinsky, Z. Noroozi, and M. Madou, “Present Technology and Future Trends in Point of Care Microfluidic Diagnostics,” Book “Microfluidic Diagnostics: Methods and Protocols, Volume 1: Fabrication and Manipulation Protocols” edited by Colin D. Mansfield, PhD; Gareth Jenkins, PhD; Humana Press, Springer Science + Business Media LLC (2013)
  5. L. Kulinsky, “Development and Application of Microbiosensors for in-vivo Diagnostics,” Book “Nanobiosensors for Personalized and Onsite Biomedical Diagnosis” edited by Pranjal Chandra, PhD; IET Publishing (2016)
  6. Guest Editor: L. Kulinsky, Special issue “Additive Manufacturing for Medical Applications” of Micromachines journal (2018)
  7. Guest Editor: I. Fassi, L. Kulinsky, M. B-G Jun, “Special Selection on Recent Advancements in Micro- and Nano‐ Manufacturing” in Journal of Micro- and Nano-Manufacturing (2019)
  8. Guest Editor: L. Kulinsky, “Special Selection on Recent Advancements in Micro- and Nano‐ Manufacturing” in Journal of Micro- and Nano-Manufacturing (2020)

Peer-Reviewed Publications:

  1. L. Kulinsky, J. D. Powers, and A. M. Glaeser, “Effects of Controlled-Geometry Sinusoidal Perturbations on the Morphological Evolution of Pore Channels in Sapphire,” International Ceramic Monographs, 1 [1], 268-73 (1994)
  2. J. D. Powers, L. Kulinsky, M. Kitayama, and A. M. Glaeser, “Effects of Titanium Doping on Surfaces and Interfacial Properties of Alumina,” Structure and Properties of Interfaces and Ceramics: MRS Symposia Proceedings 357, 313–18, Materials Research Society (1995)
  3. L. Kulinsky, J. D. Powers, and A. M. Glaeser, “Morphological Evolution of Pre-Perturbed Pore Channels in Sapphire,” Acta Materialia, 44 [10], 4115–30 (1996)
  4. M. Kitayama, J. D. Powers, L. Kulinsky, and A. M. Glaeser, “Surface and interface properties of alumina via model studies of microdesigned interfaces,” Journal of the European Ceramic Society, 19 [13], 2191–2209 (1999)
  5. L. Kulinsky, Y. Wang, M. Ferrari, “Electroviscous effects in microchannels,” Proc. SPIE 3606, 158 (1999)
  6. T. Desai, D. Hansford, L. Kulinsky, A. Nashat, G. Rasi, J. Tu, Y. Wang, M. Zhang, and M. Ferrari, “Nanopore technology for biomedical applications,” Biomedical Microdevices, 2 [1], 11-40 (1999)
  7. L. Kulinsky, H. Xu, H-K A. Tsai, and M. Madou, “System-based approach for an advanced drug delivery platform”, Proc. SPIE 6173, 61730M (2006)
  8. H. Xu, C. Wang, L. Kulinsky, J. Zoval, and M. Madou, “Sensor-integrated polymer actuators for closed-loop drug delivery system”, Proc. SPIE 6172, 61720R (2006)
  9. H-K A. Tsai, K-S Ma, J. Zoval, L. Kulinsky, and M. Madou, “Packaged Au-PPy valves for drug delivery systems”, Proc. SPIE 6168, 61681E (2006)
  10. H. Xu, H-K A. Tsai, L. Kulinsky, and M. Madou, “Electroactive Polymer Use in Novel Drug Delivery Applications”, Proc. SAMPE (2006)
  11. H-K A. Tsai, K-S Ma, C. Wand, H. Xu, C. Wang, J. Zoval, L. Kulinsky, and M. Madou, “Development of Integrated Protection for Miniaturized Implantable Controlled Drug Delivery System,” Journal of Smart Materials and Structures, 16 [2], S295-299 (2007)
  12. H. Xu, K. Malladi, C. Wang, L. Kulinsky, and M. Madou, “Carbon Post Microarrays for Glucose Sensors,” Biosensors and Bioelectronics, 23 [11], 1637-44 (2008)
  13. H-K A. Tsai, E. A. Moschou, L. Kulinsky, S. Daunert, and M. Madou, “Integrating Biosensors and Drug Delivery: A Step Closer Toward Scalable Responsive Drug Delivery Systems,” Advanced Materials, 21, 656-660 (2009)
  14. X. Casadevall i Solvas, R. Lambert, L. Kulinsky, R. Rangel, and M. Madou, “Au/PPy Actuators for Active Micromixing and Mass Transport Enhancement,” Micro and Nanosystems, 1 [1], 2-11 (2009)
  15. D. Chakraborty, R. Gorkin, M. Madou, L. Kulinsky, and S. Chakraborty, “Capillary Filling in Centrifugally Actuated Microfluidic Devices with Dynamically Evolving Contact Line Motion,” Journal of Applied Physics, 105 [8], 084904-13 (2009)
  16. V. Ho, M. Shimada, D. Szeto, P. Mukherjee, Q. Kang, L. Kulinsky, and M. Madou, “Novel Fabrication Technology for Three-Dimensional High Surface Area Pyrolyzed Structures”, Proc. SPIE 7647, 76472F (2010)
  17. V. Ho, X. Solvas, D. Scott, L. Dolci, L. Kulinsky, S. Daunert, and M. Madou, “Utilization of Electroactive Polymer Actuators in Micromixing and in Extended-Life Biosensor Applications”, Proc. SPIE 7647, 764735 (2010)
  18. S. Bisht, R. Srivastava, L.  Kulinsky, C. Jacob, C. Raj, A. Sharma, and M. Madou, “Fabrication of Advanced Carbon Electrodes for Energy Generation and Storage Applications”, Proceedings of Power MEMS, Leuven, Belgium, Nov 30-Dec 3 (2010)
  19. X. Casadevall i Solvas, R. A. Lambert, L. Kulinsky, R. H. Rangel, and M. J. Madou, “Micromixing and Flow Manipulation with Polymer Actuators,” Microfluidics and Nanofluidics, OnLine First, 0419 (2011)
  20. B. Bisht, G. Canton, A. Mirsepassi, L. Kulinsky, S. Oh, D. Dunn-Rankin, and M. J. Madou, “Controlled Continuous Patterning of Polymeric Nanofibers on 3D Substrates Using Low-Voltage Near-Field Electrospinning,” Nanoletters, 11 [4], 1831-1837 (2011)
  21. H. Chen, A. Torrents, L. Kulinsky, R. D. Nelson, M. J. Madou, L. Valdevit, and J. C. LaRue, “Mechanical Characterizations of Cast Poly(3,4-ethylenedioxythiophene): Poly(styrenesulfonate)/ Polyvinyl Alcohol thin films,” Synthetic Metals, 161 [21-22], 2259-2267 (2011)
  22. V. Ho, L. Kulinsky, and M. Madou, “Novel Fabrication Process of 3D Conductive Polymer Structures”, Proceedings of Technologies for Future Micro-Nano Manufacturing, Napa, CA, Aug 8-10 (2011)
  23. G. Bisht, G. Canton, A. Mirsepassi, D. Dunn-Rankin, L. Kulinsky, and M. Madou, “Novel Polymeric Inks for Precision Patterning of Carbon Micro/Nano-Fibers Using Near-Field Electrospinning”, Proceedings of Technologies for Future Micro-Nano Manufacturing, Napa, CA, Aug 8-10 (2011)
  24. V. Ho, X. Casadevall, L. Kulinsky, M. Madou, “Polypyrrole/Gold Bilayer Actuators as Valves for a Responsive Drug Delivery System and Their Long Term In Vitro Functionality”, 3rd International Workshop on Nanotechnology and Application, Vung Tau, Vietnam (2011)
  25. R. Gorkin, S. Soroori, W. Southard, L. Clime, T. Veres, H. Kido, L. Kulinsky, and M. Madou, “Suction-Enhanced Siphon Valves for Centrifugal Microfluidic Platforms,” Microfluidics and Nanofluidics, OnLine First, 0922 (2012)
  26. H. Chen, J. C. LaRue, R. D. Nelson, L. Kulinsky, and M. J. Madou, “Electrical Conductivity of Polymer Blends of Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate):N-Methyl-2-pyrrolidinone (PEDOT:PSS:NMP) and Polyvinyl Alcohol (PVA),” Journal of Applied Polymer Science, Online First 2/1/2012 (2012)
  27. G. B. Bisht, S. Nesterenko, L. Kulinsky, and M. J. Madou, “A Computer-Controlled Near-Field Electrospinning Setup and Its Graphic User Interface for Precision Patterning of Functional Nanofibers on 2D and 3D Substrates,” Journal of Laboratory Automation, 17 [4], 302-308 (2012)
  28. G. B. Bisht, S. Holmberg, L. Kulinsky, and M. J. Madou, “A Diffusion-Free Mediator based Miniature Biofuel Cell Anode fabricated on a Carbon-MEMS Electrode,” Langmuir, 28 [39], 14055-14064 (2012)
  29. G. Bisht, S. Nesterenko, G. Canton, H. Liu, L. Kulinsky, and M. Madou, “Controlled Micropatterning of Continuous Conducting Nanofiber Arrays Using Low-Voltage Near-Field Electrospinning”, Proceedings of 7th International Conference on MicroManufacturing, Northwestern University, IL, March 12-14 (2012)
  30. V. H. Perez-Gonzalez, V. Ho, L. Kulinsky, B. H. Lapizco-Encinas, S. O. Martinez-Chapa, and M. J. Madou, “3D Carbon Cages For Dielectrophoretic-Based Bioparticle Separation/Concentration Applications”, Proceedings of AIChE Annual Meeting Conference, New York, NY, AIChE (2012)
  31. V. H. Perez-Gonzalez, V. Ho, L. Kulinsky, B. H. Lapizco-Encinas, M. J. Madou, and S. O. Martinez-Chapa, “C-MEMS Based Electrodes For The Dielectric Characterization of Microparticles Employing Dielectrophoresis”, Proceedings of AIChE Annual Meeting Conference, New York, NY, AIChE (2012)
  32. G. Canton, G. B. Bisht, L. Kulinsky, and M. J. Madou, “Controlled Patterning and Dimensional Control of Suspended Carbon Nanofibers,” Advanced Materials Research, 628, 43-49 (2013)
  33. G. Thio, S. Soroori, F. Ibrahim, W. Alfaqheri, N. Soin, L. Kulinsky, and M. J. Madou, ”Theoretical Development and Critical Analysis of Burst Frequency Equations for Passive Valves on Centrifugal Microfluidic Platforms,” Medical & Biological Engineering & Computing, Online First Jan 6., 2013 (2013)
  34. V. H. Perez-Gonzalez, V. Ho, L. Kulinsky, M. Madou, and S. O. Martinez-Chapa, “PPyDEP: A new approach to microparticle manipulation employing polymer-based electrodes,” Lab On a Chip, 13, 4642-4652 (2013)
  35. V. Ho, C. Zhou, L. Kulinsky, and M. Madou, “Fabrication of 3D polypyrrole microstructures and their utilization as electrodes in supercapacitors,” Journal of Micromechanics and Microengineering, 23 [12], 125029 (2013)
  36. L. Kong, J. M. Rodriguez, A. Perebikovsky, J. Moebius, R. Mitchell, L. Kulinsky, and M. Madou, “Novel heating and cooling techniques on a centrifugal fluidic platform for polymerase chain reaction”, Microtechnologies in Medicine and Biology, Marina del Ray, CA, April 10-13 (2013)
  37. G. Canton, L. Kulinsky, M.J. Madou, “Electro-Mechanical Spinning: A new manufacturing technique for micro/nano-fabrication of carbon fibers”, Proceedings of IEEE International Symposium on Advanced Packaging Materials (APM), Irvine, CA, Feb. 27 – March 1 (2013)
  38. V. Ho, V. H. Perez-Gonzalez, L. Kulinsky, S. O. Martinez-Chapa, and M. Madou, “Electropolymerization Based Micromanufacturing of Three-Dimensional High Surface Area Electrodes”, Proceedings of 8th International Conference on MicroManufacturing, Victoria, British Columbia, Canada, March 25-28 (2013)
  39. S. Soroori, L. Kulinsky, H. Kido, and M. J. Madou “Design and implementation of fluidic micro-pulleys for flow control on centrifugal microfluidic platforms,” Microfluidics and Nanofluidics, 16 [6], 1117-1129 (2014)
  40. G. Canton, T. Do, L. Kulinsky, and M. Madou, “Improved conductivity of suspended carbon fibers through integration of C-MEMS and Electro-Mechanical Spinning technologies,” Carbon, 71, 338-342 (2014)
  41. S. Holmberg, A. Perebikovsky, L. Kulinsky, and M. Madou, “3-D Micro and Nano Technologies for Improvements in Electrochemical Power Devices,” Micromachines, 5, 171-203 (2014)
  42. A. Kazemzadeh, P. Ganesan, F. Ibrahim, M. Aeinehvand, L. Kulinsky, M. J. Madou, “Gating valve on spinning microfluidic platforms: A flow switch/control concept,” Sensors and Actuators B, 204, 149–158 (2014)
  43. H. Lee, L. Kulinsky, M. Madou, B. Kim, B. C. Yi, and J. H. Kim, “2-D equivalent finite element model of quadratic linear electromagnetic actuator,” Journal of Vibroengineering, 16 [4], 2047-53 (2014)
  44. H. Choi, L. Kulinsky, J. S. Jun, and J. H. Kim, “A Numerical Study of the Spring-Back Phenomenon in Bending with a Rebar Bending Machine,” Advances in Mechanical Engineering, 6, 959207 (2014)
  45. V. H. Perez-Gonzalez, V. Ho, L. Kulinsky, and S. O. Martinez-Chapa, ”Dielectrophoresis-assisted electroconductive polymer-based fabrication of high surface area electrodes”, Proc. SPIE 9056, 905628 (2014)
  46. V. H. Perez-Gonzalez, V. Ho, R. Celis-Cordova, L. Kulinsky, M. J. Madou, and S. O. Martinez-Chapa, “Improving dielectrophoretic manipulation efficiency employing pitted and bumpy interdigitated electrodes”, Proceedings of AIChE Annual Meeting Conference, New York, NY, AIChE (2014)
  47. V. H. Perez-Gonzalez, V. Ho, S. O. Navarro-Rodriguez, L. Kulinsky, M. J. Madou, and S. O. Martinez-Chapa, “The Impact of Electrode Geometry in Dielectrophoretic Effect for Multilayer PPyDEP-Based Devices”, Proceedings of AIChE Annual Meeting Conference, New York, NY, AIChE (2014)
  48. D. Carpentras, L. Kulinsky, and M. Madou, “A novel magnetic active valve for Lab-on-CD technology,” Journal of Microelectromechanical Systems, 24 [5], 99 (2015)
  49. S-J. Lee, L. Kulinsky, B. Park, S. H. Lee, and J. H. Kim, “Design optimization of coil gun to improve muzzle velocity,” Journal of Vibroengineering, 17 [2], 554-561 (2015)
  50. V. Ho, A. G. Narenji, L. Kulinsky, and M. Madou, “The Detachment Process and Release Efficiency of Polypyrrole/Gold Bilayer Actuators,” Journal of Microelectromechanical Systems, 24 [5], 1616-1621 (2015)
  51. A. Kazemzadeh, P. Ganesan, F. Ibrahim, L. Kulinsky, and M. J. Madou, “Guided routing on spinning microfluidic platforms,” RSC Advances, 5 [12], 8669-8679 (2015)
  52. L. Kong, A. Perebikovsky, J. Moebius, L. Kulinsky, and M. Madou, “Lab-on-a-CD: A Fully Integrated Molecular Diagnostic System,” Journal of Laboratory Automation, Online First June 16, 2015, 1-33 (2015)
  53. V. Perez-Gonzalez, V. Ho, M. Vazquez-Pinon, S. O. Martinez-Chapa, and L. Kulinsky, “A novel micro/nano fabrication process based on the combined use of dielectrophoresis, electroosmotic flow, and electrodeposition for surface patterning,” Journal of Micromechanics and Microengineering, 25 [11] (2015)
  54. G. Canton, C. Mendoza-Buenrostro, M. Madou, and L. Kulinsky, “Joule Heating Based Sublimation Thinning of Suspended Nanofibers”, Proceedings of 10th International Conference on MicroManufacturing, Milan, Italy, March 30- April 2 (2015)
  55. V. H. Perez-Gonzalez, V. Ho, M. Vazquez-Piñon, S. O. Martinez-Chapa, and L. Kulinsky, “An Electrokinetically-Driven Microfabrication Process for Additive Manufacturing Applications”, Proceedings of 10th International Conference on MicroManufacturing, Milan, Italy, March 30- April 2 (2015)
  56. S. Soroori, J. M. Rodriguez‑Delgado, H. Kido, G. Dieck‑Assad, M. Madou, and L. Kulinsky, “The use of polybutene for controlling the flow of liquids in centrifugal microfluidic systems,” Microfluidics and Nanofluidics, First online: 07 January 2016 (2016)
  57. V. H. Perez-Gonzalez, V. Ho, M. Vazquez-Pinon, L. Kulinsky, and S. Martinez-Chapa, “Additive Micromanufacturing Process of Electrokinetic Surface Patterning Utilizing Electroconductive Polymers”, Proceedings of 11th International Conference on MicroManufacturing, Irvine, CA, March 29- 31 (2016)
  58. N. Li, Y-C. Lin, B. Dolan, and L. Kulinsky, “Use of additive manufacturing in creating sub-millimeter micro-architectured structures via investment casting”, Proceedings of 11th International Conference on MicroManufacturing, Irvine, CA, March 29- 31 (2016)
  59. M. Vázquez-Piñón, L. Kulinsky, V. H. Perez-Gonzalez, M. J. Madou, S. O. Martinez-Chapa, and H. Hwang, “Effect of Interdigitated Electrode Asymmetry on Performance of Carbon Based AC Electroosmotic Micropumps”, Proceedings of AIChE Annual Meeting Conference, San Francisco, CA, November 13-18 (2016)
  60. B. Sun and L. Kulinsky, “Fabrication of regular polystyrene foam structures with selective laser sintering,” Materials Today Communications, 13, 346-353 (2017)
  61. B. Sun and L. Kulinsky, “Finite Analysis Simulation of Compressive Loads Reveals Superiority of Foam-based Micro-architectured Structures”, Proceedings of the World Congress of Micro- and NanoManufacturing, Kaohsiung, Taiwan, March 27-30 (2017)
  62. M. Bauer and L. Kulinsky, “Fabrication of a Lab-on-Chip Device Using Material Extrusion (3D Printing) and Demonstration via Malaria-Ab ELISA,” Micromachines, 9 [1], 27 (2018)
  63. C. Lim, Y. Lee, and L. Kulinsky, “Fabrication of a Malaria-Ab ELISA Bioassay Platform with Utilization of Syringe-Based and 3D Printed Assay Automation,” Micromachines, 9 [10], 502 (2018)
  64. C-I Cheng, J. Cortez, I. Chino Dorantes, E. Rodriguez, S. Habibi Zad, and L. Kulinsky, “The study of particle-particle interaction and assembly under the influence of dielectrophoretic force experienced between carbon microelectrodes”, Proceedings of the World Congress of Micro- and NanoManufacturing, Portoroz, Slovenia, September 18-20 (2018)
  65. M. Vázquez-Piñón, L. Kulinsky, M. J. Madou, and S. O. Martínez-Chapa, “Effect of carbon microposts integrated onto asymmetric electrodes for AC electroosmotic pumping”, Proceedings of the World Congress of Micro- and NanoManufacturing, Portoroz, Slovenia, September 18-20 (2018)
  66. M. Vazquez-Pinon, B. Pramanick, F.G. Ortega-Gama, V.H. Perez-Gonzalez, L. Kulinsky, M.J. Madou, H. Hwang, and S. O. Martinez-Chapa, “Hydrodynamic channeling as a controlled flow reversal mechanism for bidirectional AC electroosmotic pumping using glassy carbon microelectrode arrays,” Journal of Micromechanics and Microengineering, 29 [7], 075007 (2019)
  67. M. Vazquez-Pinon, H. Hwang, M. Madou, L. Kulinsky, and S. O. Martinez-Chapa, “Comparison of two-dimensional and three-dimensional carbon electrode geometries affecting bi-directional electroosmotic pumping,” Journal of Micro- and Nano-Manufacturing, 7 [2], 024510 (2019)
  68. T. Zhou, Y. Lu, S. Habibi Zad, Y. Zhou, L. Zhao, and L. Kulinsky, “Dielectrophoresis-driven Assembly of Polymer Microbeads and Carbon Nanotubes Upon Fabricated Carbon Microelectrodes”, Proceedings of the World Congress of Micro- and NanoManufacturing, Raleigh, NC, USA, September 10-12 (2019)
  69. J. Cortez, K. Damyar, R. Gao, T. Zhou, and L. Kulinsky, “Electrokinetic movement of the microparticulates between high resistance microelectrodes under the influence of dielectrophoretic force”, Proceedings of the World Congress of Micro- and NanoManufacturing, Raleigh, NC, USA, September 10-12 (2019)
  70. J. Cortez, K. Damyar, R. Gao, T. Zhou, and L. Kulinsky, “Electrokinetic Propulsion of Polymer Microparticulates Along Glassy Carbon Electrode Array,” Journal of Micro- and Nano-Manufacturing, 8 [2], 024504 (2020)
  71. T. Zhou, E. Kropp, J. Chen, and L. Kulinsky, “Step-Wise Deposition Process for Dielectrophoretic Formation of Conductive 50-Micron-Long Carbon Nanotube Bridges,” Micromachines, 11 [4], 371 (2020)
  72. T. Zhou, J. Chen, E. Kropp, and L. Kulinsky, “Guided Electrokinetic Assembly of Polystyrene Microbeads onto Photopatterned Carbon Electrode Arrays,” ACS Applied Materials & Interfaces, 121 [31], 35647 (2020)
  73. T. Singleton and L. Kulinsky, “Fabrication of Carbon Nanotube Gas Sensor Using Stepwise Dielectrophoretic Deposition Onto Interdigitated Pyrolyzed Carbon Electrodes,” Journal of Micro and Nano-Manufacturing, 9 [3], 030901 (2021)
  74. T. Zhou, S-Y Yu, M. Michaels, F. Du, L. Kulinsky, and M. A. Al Faruque, “Establishing Digital Recognition and Identification of Microscopic Objects for Implementation of Artificial Intelligence (AI) Guided Microassembly”, Proceedings of the World Congress of Micro- and NanoManufacturing, Mumbai, India, September 20-23 (2021)
  75. T. Zhou, M. Michaels, and L. Kulinsky, “Guided Healing of Damaged Microelectrodes via Electrokinetic Assembly of Conductive Carbon Nanotube Bridges,” Micromachines, 12 [4], 405 (2021)
  76. L. Kulinsky, “Personal Observations of the Effects of COVID-19 Pandemic on Micromanufacturing Research and Education in the United States,” Journal of Micro and Nano-Manufacturing, 9 [3], 034701 (2021)
  77. S. Peshin, D. George, R. Shiri, L. Kulinsky, and M. Madou, “Capillary Flow-Driven and Magnetically Actuated Multi-Use Wax Valves for Controlled Sealing and Releasing of Fluids on Centrifugal Microfluidic Platforms,” Micromachines, 13 [2], 303 (2022)
  78. M. Michaels, S-Y. Yu, T. Zhou, F. Du, M. A. Al Faruque, and L. Kulinsky, “Artificial Intelligence Algorithms Enable Automated Characterization of the Positive and Negative Dielectrophoretic Ranges of Applied Frequency,” Micromachines, 13 [3], 399 (2022)
  79. Y. Liu, L. Kulinsky, R. Shiri, and M. Madou, “Elastic membrane enabled inward pumping for liquid manipulation on a centrifugal microfluidic platform”, Biomicrofluidics, 16 [3], 034105 (2022)
  80. V. Kordzadeh-Kermani, M. Madadelahi, S. N. Ashrafizadeh, L. Kulinsky, S. O. Martinez-Chapa, and M. J. Madou, “Electrified lab on disc systems: A comprehensive review on electrokinetic applications”, Biosensors and Bioelectronics, 214, 114381 (2022)
  81. T. Zhou, S. Najafikhoshnoo, R. Esfandyarpour, and L. Kulinsky, “Immersed Microfluidic Spinning of Calcium Alginate Microfibers Towards Tissue Engineering Applications”, Proceedings of the World Congress of Micro- and NanoManufacturing, Leuven, Belgium, September 19-22 (2022)
  82. S. Peshin, M. Madou, and L. Kulinsky, “Microvalves for Applications in Centrifugal Microfluidics”, Sensors, 22 [22], 8955 (2022)
  83. T. Zhou, S. NajafiKhoshnoo, R. Esfandyarpour, and L. Kulinsky, “Dissolvable Calcium Alginate Microfibers Produced via Immersed Microfluidic Spinning”, Micromachines, 14 [2], 318 (2023)
  84. S. Yan, Z. Rajestari and L. Kulinsky, “Electrokinetic Manipulation of Biological Cells Towards Biotechnology Applications”, Proceedings of the World Congress of Micro- and NanoManufacturing, Evanston, IL, September 18-21 (2023)
  85. S. Peshin, M. Madou, and L. Kulinsky, “Integrating Bio-Sensing Array with Blood Plasma Separation on a Centrifugal Platform”, Sensors, 23 [3], 1710 (2023)
  86. S. Peshin, J. Golden, B. Gan, C. Mast, and L. Kulinsky, L. “Controlling the advancement of the liquid front of the nitrocellulose membrane assay under the influence of the centrifugal force on the Lab-on-a-Disc platform”, Sensors and Actuators B: Chemical, 386, 133735 (2023)
  87. Z. Rajestari, J. Kalaus, and L. Kulinsky, “Study of the Immersed Microfluidic Spinning Toward Tissue Engineering Applications”, Proceedings of the World Congress of Micro- and NanoManufacturing, Evanston, IL, September 18-21 (2023)
  88. A.Z. Taravatfard, C. Ceballos-Gonzalez, A.B. Siddique, J. Bolivar-Monsalve, M. Madadelahi, G. Trujillo-de Santiago, M.M. Alvarez, A.K. Pramanick, E.M. Guerra, L. Kulinsky, and M.J. Madou, “Nitrogen-functionalized Graphene Quantum Dot Incorporated GelMA Microgels as Fluorescent 3D-tissue Constructs”, Nanoscale, 15 [40], 16277 (2023)
  89. Z. Rajestari, J. Kalaus, and L. Kulinsky, “The Dissolvable Alginate Fiber Network Produced Via the Immersed Microfluidic Spinning”, Journal of Micro and Nano-Manufacturing, 11 [3], 034502 (2023)
  90. S. Yan, Z. Rajestari, T. C. Morse, H. Li, and L. Kulinsky, “Electrokinetic Manipulation of Biological Cells towards Biotechnology Applications”, Micromachines, 15 [3], 341 (2024)
  91. G. Ferro, J. Kalaus, J. L. Chen, E. Murphy, L. Kulinsky, and P. Atanassov, “Nickel-Molybdenum Hydrogen Evolution and Oxidation Reaction Electrocatalyst obtained by Electrospinning”, Electrochimica Acta, 483, 143912 (2024)

Patents and Invention Disclosures:

  1. “Five layer adhesive/insulator/metal/insulator/adhesive tape for semiconductor die packaging” US 6,768,211 (2003) and US 6,621,166 B2
  2. “Semiconductor device with capacitively coupled field plate” US 7,525,178 B2
  3. “Polymer-based high surface area multi-layered three-dimensional structures and method of making same” US 8,641,883 B2
  4. “Centrifugal Microfluidic Platform with Modular Components” 2010-237-0
  5. “Centrifugal Microfluidic Device with Lateral Flow Assay Capabilities” 2011-300-0
  6. “Dielectrophoresis and Electrodeposition Process for Selective Particle Entrapment” US 9,353,455 B2
  7. “Centrifugal Micro-Pulley Pump to Direct Fluid Flows Towards Center of CD” 2013-693-0
  8. “Centrifugal Force-Based Valving Technique For Lab-On-a-Chip Applications” 2014-216-0
  9. “Device and Method for Drag Force-Based Particle Separation” 2014-215-0
  10. “Centrifugal Microfluidic Platform for Automated Media Exchange” US 10,166,541 B2
  11. “Device for the Efficient Capture and Detection of Analytes” 2015-225-0
  12. “3D Printed Mini-Trumpet Lab on Chip” 2015-219-1
  13. “Imprinter for Conformal Coating of Three-Dimensional Surfaces” US 10,245,614 B2
  14. “Selective Laser Sintering Using Functional Inclusions Dispersed In The Matrix Material Being Created” US 11,534,832 B2
  15. “Sieve System and Methods for Cell Media Exchange” US 11,142,738 B2
  16. “Powder Bed Additive Manufacturing Method of Fabricating a Porous Matrix” US 11,001,002 B2
  17. “Guided Template Based Electrokinetic Microassembly (TEA)” US 11,840,769
  18. “Step-wise Fabrication of Conductive Carbon Nanotube Bridges via Dielectrophoresis” US 11,912,900
  19. “Dissolvable Calcium Alginate Microfibers Produced via Immersed Microfluidic Spinning Towards Fabrication of Embedded Microfluidic Networks” 2023-755-1; Provisional Application 63/480,898
  20. “Smartphone-enabled Mini-CD Point of Care Diagnostic Platform” 2023-745-0 (2023)